How to extend the life of your water well

Extending the service life of a water well requires a multifaceted approach that takes into account factors such as the water source, the well tool, and the pumping method. The following are some specific methods:

1. Reasonable pumping

Control the pumping volume: According to the carrying capacity of groundwater resources, reasonably control the pumping volume to avoid excessive pumping leading to the decline of groundwater level.
Adjust the pumping frequency: Avoid continuous pumping for a long time, pumping can be done at different times to give time for groundwater recharge.
Installation of flow meter: Real-time monitoring of pumping volume through flow meter to prevent over-pumping.
2. Regular inspection and maintenance
Check the wellhead: Check whether the wellhead is blocked regularly to prevent debris from entering the well and polluting the water source.
Inspection of water pumps: Regularly check the operation of water pumps and replace worn parts in time.
Test water quality: Regularly test the water quality to ensure that the water quality meets the drinking standards.

3. Protect the water source

Prevent pollution: Keep the surrounding environment clean and prevent pollutants such as pesticides and fertilizers from seeping into the groundwater.
Tree planting: Increase vegetation cover, reduce surface runoff, slow down soil erosion.

4. Scientific design of wells

Choosing the right well pipe: according to the water quality and geological conditions to choose corrosion-resistant, wear-resistant well pipe.
Installation of water filtering pipe: The water filtering pipe can effectively filter the impurities in the water and protect the pump.

5. Pay attention to seasonal changes

Reduce the amount of pumping in the dry season: In the dry season, the amount of pumping should be reduced to protect the groundwater resources.
Pay attention to flood control in rainy season: Do a good job of flood control in rainy season to prevent rainwater from backing up into the well.

6. Scientific site selection

Keep away from pollution sources: When drilling wells, choose a location far away from pollution sources.
Considering the geological conditions: choose a place with stable geological conditions for drilling wells.

7. Installation of submersible pumps

Choose the right power submersible pump: avoid overloading the motor and prolong its service life.
Clean the submersible pump regularly: Remove the impurities on the pump body to improve the efficiency of the pump.

8. Installation of water level controller

Automatically control the pump: when the water level is lower than the set value, the pump starts automatically; when the water level reaches the set value, the pump stops automatically to avoid idling.

Summarize

Extending the service life of water wells requires the joint efforts of many parties, not only from the technical improvement, but also from the management to strengthen supervision. Only in this way can we ensure the sustainable utilization of groundwater resources.

If you need to replace a new water well, click the link diameter below to contact our professional team.

Contact us (gzpearldrill.com)