What are the exact steps for drilling?

The specific steps of drilling usually include the following:

1. Preparation:

Select the appropriate drill bit and make sure the drill rig is working properly.

2. Positioning:

Determine the location of the drill and mark it with a marker.

3. Installation of the drill bit:

Attach the drill bit firmly to the Drilling Rig.

4. Setting Drill Rig Parameters:

Set the appropriate RPM and feed speed according to the drill bit and material type.

5. Start drilling:

Start the drill rig and apply pressure slowly to allow the drill to begin drilling.

6. Maintain stability:

Keep the drill rig steady and avoid shaking during drilling.

7. monitor progress:

Observe the progress and condition of the drill hole.

8. Remove debris:

Regularly remove debris generated so as not to affect the quality of the drilled hole.

9. complete drilling:

Stop drilling when desired depth or other requirements are reached.

10. Remove drill bit:

Remove the drill bit carefully.

11. cleanup:

Clean up the drilling area and the drill rig.

Coal mining PDC Anchor Drill bit