Drill pipe

oil drill pipe

If you are interesting at oil drill pipe,you can contact us with the inquiry button.
INQUIRY WhatsApp

Description of oil drill pipe

◆ High-quality material selection and advanced heat treatment process, especially high low temperature toughness
◆ The sleek and extra-long tube thickened transition zone and solid wear-resistant belt reflect the long service life of the product.
◆ Meet or exceed the requirements of API-5DP, API-7G, API-Q1 and 1SO-9001
◆ Complete advanced testing methods, strict quality control, to ensure the provision of high-quality products with stable performance

◆ High-end technical personnel and high-strength product development capabilities provide products with special requirements that users urgently need.

Basic Info.

Model NO.

3-1/2′′ 5′′

Surface Treatment

Spray-Paint

Operation Pressure

Atmospheric Pressure

Material

Alloy

Pipe Size

2-3/8′′ to 6-5/8′′

Tool Joint Od

3-3/8′′ to 8-1/2′′

Internal Coating

Tk34 Pm 350 or as Requirement

Hardbanding

Arnco, Dura Band, Nc Otw 12

Steel Grade

E X S G

Transport Package

Wooden Box

Specification

API 5DP standard

Trademark

JX PETRO

Origin

China Shandong

HS Code

7304231000

Production Capacity

2000 PCS/Month

Packaging & Delivery

Package Size

1000.00cm * 25.00cm * 25.00cm

Package Gross Weight

200.000kg

Product Description

Drill pipe, is hollow, thin-walled, steel or aluminium alloy piping that is used on Drilling Rigs. It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annulus. It comes in a variety of sizes, strengths, and wall thicknesses, but is typically 27 to 32 feet in length (Range 2). Longer lengths, up to 45 feet, exist (Range 3).

Standard:API 5DP drill pipe, API SPEC 7 Standards
Size: 60.3 ~ 168.3mm
Grade: E75,X95,G105,S135
Upset Type: EU, IEU
API 5DP drill pipe internal Coating:High abrasion resistance and low friction factor,

Hard-banding: Good balance between anti-wear and friction-reduction; The wear rate is less than 6% of that of the bare tool joint, which can prolong 3 times of the tool joint service life; Reduce the torque of drilling string; Good weldability with a little splash and good re-welding performance

Production complies with the provisions under the Standard API 5DP AND SPEC 7-1.
Internal coating TK34, PM200, PM350 are available, or according to client requirement request
hardbanding "ANKE" 100XT 150XT 300XT 350XT, DURABAND NC, OTW12, TCS series are available.
magnetic partical inspection, hardness inspection, Automatic ultrasonic inspection, welding report will be provided

Size		Weight (lb/ft)	Grade	Wall thickness		Upset types
Inch	mm	Weight (lb/ft)	Grade	Inch	mm	Upset types
2 3/8	60.3	6.65	E.X.G.S	0.28	7.11	EU
2 7/8	73	10.4	E.X.G.S	0.362	9.19	IU,EU
3 1/2	88.9	9.5	E	0.254	6.45	IU,EU
3 1/2	88.9	13.3	E.X.G.S	0.368	9.35	IU,EU
3 1/2	88.9	15.5	E	0.449	11.4	IU,EU
3 1/2	88.9	15.5	X.G.S	0.449	11.4	EU,IEU
4	101.6	14	E.X.G.S	0.33	8.38	IU,EU
4 1/2	114.3	13.75	E	0.271	6.88	IU,EU
4 1/2	114.3	16	E.X.G.S	0.337	8.56	EU,IEU
4 1/2	114.3	20	E.X.G.S	0.43	10.92	EU,IEU
5	127	16.25	X.G.S	0.296	7.52	EU
5	127	19.5	E	0.362	9.19	IEU
5	127	19.5	X.G.S	0.362	9.19	EU,IEU
5	127	25.6	E	0.5	12.7	IEU
5	127	25.6	X,G,S	0.5	12.7	EU,IEU