How to Choose High-Impact-Resistance DTH Drill Bits Made in China

If you're into mining, water well drilling, geological exploration, or foundation work, you've probably run into this problem: high-impact down-the-hole (DTH) drilling is great for getting through tough rock, but when you hit really hard or broken-up ground, the drill bit often can't handle it. The tooth seats crack, the buttons fall off, or the bit wears out way too fast. And that really messes with your progress and your budget. Choosing a Chinese DTH bit that's built tough isn't just about saving money—it's about keeping your project moving. In this article, we'll walk through what makes a bit impact-resistant, what to look for when buying one, some solid product lines from Pearldrill, and how a few top Chinese brands stack up.

What Actually Makes a DTH Drill Bit Impact-Resistant?

1. Good steel matters

A high-impact bit usually has a body made from high-strength chrome-molybdenum alloy steel that's been heat-treated just right (case hardening and quenching). That gives it a hard outer shell and a tough inner core—so it can take pounding without cracking.

2. Button shape and quality

Round-top (ballistic) buttons handle shock way better than chisel-shaped ones. In super hard or fractured rock, they're much less likely to snap off.

3. Face design

Concave or flat face designs do a better job of spreading out the impact force and clearing away rock cuttings. That means less off-center stress on the bit.

Picking the Right Drill Bit for Your Ground Conditions

Rock Type / Conditions	Best Face Shape	Best Button Shape	What You Need
Super hard, very abrasive rock (like granite, basalt)	Flat or concave	Hemispherical buttons	High impact + high wear resistance
Medium-hard to hard rock with fault zones or fractures	Concave	Ballistic or parabolic buttons	Extra-high impact resistance (to avoid jamming and wandering)
Soft to medium rock (like limestone, sandstone)	Convex or double-concave	Chisel or parabolic buttons	Medium impact + fast drilling speed

Pearldrill's High-Impact Bits – What They Offer

Click

1. High-pressure DTH bits: Designed for hammers running at 17–35 bar. They use high-grade YK05 carbide buttons and have anti-loss features to keep buttons in place. Great for heavy piling and deep holes. They fit most standard shanks like DHD, QL, Mission, SD, and COP.
2. PDC bits: If you're in softer to medium ground and want speed, these cut instead of hammer. They're wear-resistant and last a long time—good for oil, gas, geothermal, and water wells.
3. Roller cone bits: For big holes or tricky deep drilling, these take steady axial loads well. Reliable for mining and large-diameter jobs.
4. Top hammer tools: Threaded button bits (R32, T38, T45, T51), rods, and couplings—built for small-to-medium quarry and tunnel drilling.

Quick Look at Major Chinese DTH Drill Bit Brands

Brand	Main Products	Strengths	Best For
Pearldrill	DTH bits, PDC bits, roller bits	Carburizing heat treatment, anti-loss buttons, handles high pressure well	Water wells, piling, exploration
Heijingang (Black Diamond)	Medium-to-high pressure DTH bits, hammers	Big exporter, fits many shanks, soaks up high-frequency impact	Open-pit mines, large water projects
Xinjingang (New Diamond)	DTH bits, rock drilling tools	High fatigue resistance, lots of concave and button options	Fractured zones, extra-hard rock
Hengwang Group	DTH bits, piling and geotech bits	Good value, adapts to many projects	Low-noise piling, solar foundation work, shallow exploration
Zhongzuan Group	YK05 alloy DTH bits, top hammer bits	Uses coarse-grain carbide, balanced wear and impact resistance	Anchor bolting, tunnel drilling, mining

Tips for Buying Chinese DTH Drill Bits (and Avoiding Headaches)

1. Check the shank compatibility: Make sure the bit fits your existing hammer. Don't assume—double-check.
2. Look at how it's made: Go for brands that use cold-pressed tooth seats, vacuum heat treatment, and good-quality carbide (like virgin coarse-grain alloy). That's where durability really comes from.

3. Test before you commit: If you're drilling in tricky ground, run a small trial first. Watch how the buttons wear—if they're chipping instead of wearing down normally, the bit might not be tough enough for your conditions.

Contact us

Click Below to Consult Our Experts on Maximizing Efficiency with High-Performance Tools.

More Related Articles About [PDC Drill Bits]

Which Chinese Drill Bit Design Lasts Longer in Abrasive Formations

Common Mistakes When Buying Chinese Drill Bits in 2026 and How to Avoid Them

Which Brand Has the Most Reliable Water Well Drill Bits in 2026