How to deal with the slurry pump bearing heat
How to deal with bearing heat
1) Failure to turn on the cooling water or cooling water tank blockage.
The cooling water should be turned on or the cooling water tank should be unblocked.
2)Bad lubrication.
It may be that the lubricant is too much or too little, and the amount of oil should be adjusted according to the instructions.
3)The lubricating oil is not clean and there are impurities in the oil.
The bearing should be cleaned and the lubricant changed.
4) Thrust bearing direction is not right.
The thrust bearing should be reoriented for the inlet pressure situation.
5) The air outlet of the bearing is blocked, so the hot air in the bearing housing cannot be discharged.
Make the temperature rise should be cleaned at the air outlet.
If you need to buy the right slurry pump, click the link below to contact our professional team.
Contact us
