How to reduce the loss of drill bits during the drilling process

Drill bit is one of the most important tools in the drilling process, and its loss directly affects the drilling efficiency and cost. In order to reduce the loss of drill bits, we can start from the following aspects:
1. Optimize drilling fluid
Choose suitable drilling fluids: According to the formation conditions, choose drilling fluids with good lubrication, cooling, rock-carrying and suspension properties, so as to reduce the friction and abrasion between the drill bit and the formation.
2. Reasonable control of drilling parameters

Rotation speed: 

Too high a speed will easily cause the drill bit to overheat, while too low a speed will slow down the drilling speed. The rotational speed should be reasonably controlled according to the diameter of the drill bit and the hardness of the formation.

Drilling speed: 

Too fast drilling speed will cause friction between the drill bit and the well wall, which will increase the wear. The drilling speed should be reasonably controlled according to the length of the drilling tools and the performance of the drilling fluid.

3. Choosing the right drill bit

Select drilling bits according to formation conditions: 

Different types of drilling bits are needed for different formation conditions, for example, cemented carbide drilling bits should be selected for hard rock formations, while polycrystalline diamond composite bits can be selected for soft rock formations.

4. Optimize drilling process

Avoid shock load: 

In the process of drilling, sudden shock load should be avoided so as not to damage the drill bit.

Prevent jamming: 

Take effective measures to prevent jamming, such as timely treatment of well leakage, control the performance of drilling fluid.

5. Strengthen the maintenance of drilling equipment

Regular inspection and maintenance of Drilling Rigs: 

Regularly inspect all parts of the drilling rigs to ensure that they are in good working condition.

Timely replacement of worn parts: 

Replace worn parts in time to ensure the normal operation of the drilling rig.

Through the comprehensive use of the above methods, you can effectively reduce the loss of the drill bit during the drilling process, improve the drilling efficiency and reduce the drilling cost. If you don't know how to choose the right water well drilling rig, click the link below to contact our professional team directly.

Contact us (gzpearldrill.com)