Why is there no water when the mud pump is turning
The situation that there is no water when the Mud Pump of the Drilling Rig is rotating is relatively common, which will cause the drilling rig to be stuck, and there are many reasons for this failure, which need to be analyzed according to the site conditions in order to find out the reasons and then carry out repairs. First of all, if the mud pump in the installation of ignoring the height of the limit, resulting in the actual position is too high, beyond the suction range of the mud pump operation, the pump casing may retain a part of the air can not be completely discharged, prone to rotate without water. Secondly, the inlet pipeline air intake, will also lead to mud pump operation without water failure. At the same time, the inlet pipeline is not smooth is also a relatively common problem, mainly because of the mud clogging the filter of the bottom valve, affecting the normal opening and closing of the bottom valve. Again, the wrong direction of rotation of the mud pump. The operator neglects to check the rotation direction when using the pump. Finally, the rotation speed of the mud pump is low, which also leads to the situation of no water when it rotates, thus affecting the normal operation of the drilling rig and the normal work related to agricultural water conservancy water wells. If you don't know how to choose the right slurry pump, click the link below to contact our professional team directly. Contact us
